THE ULTIMATE
In-house 
ALIGNER 
& digital orthodontics course
HANDS-ON BOOTCAMP
A Comprehensive Mastery Course on Intraoral 
Scanning, Digital Case Set-up, 3D Printing, and 
Aligner Fabrication & Delivery
APRIL 12-13, 2019 - SOLD OUT 
MARCH 29-30, 2019
JASON B. COPE, DDS, PhD - DALLAS, TX
*Seats are limited to 12 spots.
THE ULTIMATE
In-house 
ALIGNER 
& digital orthodontics course
HANDS-ON BOOTCAMP
A Comprehensive Mastery Course on Intraoral 
Scanning, Digital Case Set-up, 3D Printing, and 
Aligner Fabrication & Delivery
APRIL 12-13, 2019 - SOLD OUT 
MARCH 29-30, 2019
JASON B. COPE, DDS, PhD - DALLAS, TX
*Seats are limited to 12 spots.
ADVANCED
MINISCREW
 MECHANICS course
INTENSIVE BOOTCAMP
A simplified step-by-step approach to treating your most complex cases often without surgery, with very few TADs and using your standard straight wire mechanics.
DECEMBER 6-7, 2019
JASON B. COPE, DDS, PhD - DALLAS, TX
*Limited to 18 seats. Only 10 Seats Left
ADVANCED MECHANICS
MINISCREW
 course
HANDS-ON BOOTCAMP
Everything TAD mechanics. A simplified step-by-step approach to
treating your most complex cases without surgery, with very few
TADs and your standard straight wire mechanics.
DECEMBER 06-07, 2019
JASON B. COPE, DDS, PhD - DALLAS, TX
*Limited to 18 seats

ATTENTION
Due to limited space, this course is being offered by invitation only. You have 48 hours to register before registration opens to our private list and then to the public. Based on previous course dates and verbal commitments, we anticipate this will sell out in less than 24 hours. Make sure to reserve your seat as soon as possible.
IS THIS COURSE FOR ME?
Are you already using TADs in your practice, but still don't feel completely confident handling mechanics for simple, complex, or even surgical cases?  Do you not have time to figure it all out on your own? Then this course is for you!

Come learn it all first hand in an intensive 2-day course led by an orthodontist whose forte is TAD mechanics on complex cases!

WHY SHOULD I USE TADs?
  • MORE PATIENT STARTS: No more referring patients out because you can't help them unless they are willing to do surgery.
  • AVOID SURGERY: Miniscrews allow you to treat some surgical cases without surgery.
  • FASTER TREATMENT TIME: Considerably shorter treatment time in comparison to traditional mechanics in some cases.
  • HIGHER TREATMENT FEES: Charge higher fees while still saving your patients a ton of money by avoiding surgery.
  • MINIMIZE PATIENT COMPLIANCE: Stop begging your patients to wear their rubber bands.
  • MECHANICS CONTROL: Full control of your mechanics and the confidence of where treatment is going.
  • STAND OUT FROM COMPETITION: Differentiate yourself by offering treatment options that your competition doesn't.
  • TRANSFORMED PATIENTS: Sit back, relax, and let those raving patients do your marketing for you.
WHAT KIND OF CASES WILL I LEARN TO TREAT WITH TADs?
  • CLASS II TREATMENT
  • EN MASSE RETRACTION
  • OPENBITE CLOSURE
  • SUPERERUPTED MOLAR INTRUSION
  • VME INTRUSION
  • LATERAL INCISOR REPLACEMENT
  • CLASS III TREATMENT
  • MOLAR PROTRACTION
  • DEEPBITE INTRUSION
  • DUMPED MOLAR UPRIGHTING
  • IMPACTED CANINES
  • TRANSVERSE DISCREPANCIES
WHY WE'RE LEADING THE WAY
1. We Stand Alone
There is simply no other course out there that offers this level of personalized attention by a world expert.
2. We're Personal
We are limited to 18 attendees only and the course will take place in Dr. Cope's private practice, which allows for a level of instruction and participation that is unparalleled.
3. We're Objective
We’ll teach you everything you need to know to feel confident and successfully treat TAD cases in your practice.
3. Simplified Mechanics
Our philosophy: Use as many TADs as necessary, and as few as possible to achieve the desired outcome. You'll learn smart treatment planning for TADs, so you'll need fewer miniscrews to achieve ideal results.
PREREQUISITES
PREREQUISITES
  • You must have a comprehensive understanding of orthodontic biomechanics with at least 2 years of full-time orthodontic practice and advanced training.
  • You must be familiar with miniscrew placement, use, and removal procedures from Dr. Cope’s In-Office Introductory course or his Online TAD Diagnosis & Treatment Planning video course. Also, mastery of the basic fundamentals of miniscrew implant use is required.
Hurry! Only 0 Spots Left!
WHO IS JASON B. COPE?
ONE OF THE BIGGEST NAMES IN ORTHODONTICS
WHEN IT COMES TO TADs
Internationally acclaimed for his pioneering research and clinical techniques on TADs, Dr. Jason B. Cope is also widely known for being a perfectionist, not only on his orthodontic cases, but for everything he does. 

Dr. Cope’s was a pioneer in the development of Temporary Anchorage Devices focusing on the development of clinical protocols and products to enhance MiniScrew Implant (MSI) use. He began using TADs in 1999. After several years of use, he partnered with IMTEC Corp in Ardmore, Oklahoma, in 2003, to develop the Ortho Implant, the first US manufactured orthodontic MSI.

He coined the term Temporary Anchorage Devices and developed the nomenclature system used by most orthodontists today to describe the various different types of TADs. He developed the Cope Placement Protocol™, the first minimally invasive protocol that utilized drill-free MSI placement with topical anesthetic only.

He also developed a patented life-like triple-density typodont for teaching MSI placement methods. Other protocols and products he developed include the biomechanically-oriented MSI-based palatal protocol for openbite closure, the patented openbite closing transplatal arch, the biomechanically-oriented MSI-based molar protraction protocol, the concept of temporarily replacing missing permanent lateral incisors in growing kids with MSIs, as well as the patented locking closed coil spring for TADs.

During this course, Dr. Cope will show you everything he knows and recommends about TAD treatment mechanics. He'll show you how to set up your mechanics in a simple and practical way. He'll also show you how to streamline your workflow using TADS in the most seamless manner possible so you can achieve consistent results.

Dr. Cope received his dental training at Baylor College of Dentistry - DDS (‘95), orthodontic certificate (‘97), and PhD (’99) in bone biology. He is currently on faculty in the Orthodontic Departments at Texas A&M College of Dentistry, St. Louis University,  and Kyung Hee University School of Dentistry. He has published 32 journal articles, 37 book chapters, co-edited a textbook on distraction osteogenesis, and self-published a 500 page textbook OrthoTADs: The Clinical Guide and Atlas. He is an ad hoc reviewer for every major American peer-reviewed orthodontic journal. He has given over 300 lectures internationally and nationally. He is Board Certified, a full member of the SW component of the Angle Society, and a fellow in the American College of Dentists.
COURSE OUTLINE
You'll implement everything you learn immediately through our hands-on, step-by-step processes to help you treat those seemingly impossible cases with TADs in your practice right away.
This 2-day advanced course covers the use of miniscrew implants (MSIs) in advanced cases for orthodontic malocclusions. Dr. Cope uses his rich experience with miniscrews to demonstrate advanced techniques for cases of the sagittal, vertical, and transverse dimensions appropriate for miniscrew applications. During the course, specific cases will be treatment planned and analyzed mechanically to ensure that participants fully understand the ramifications of incorporating MSIs into clinical practice. Note: This is an advanced course, it is expected that participants are already familiar with placement, use, and removal procedures from Dr. Cope’s In-Office Introductory course or Online TADs Diagnosis & Treatment Planning video. The group session diagnosis and treatment planning will reveal the various treatment plans for each individual case prior to viewing the actual treatment sequence of the treated case.
During the course, you will learn by:
TAD case presentations and discussion of advanced cases of the sagittal, vertical, and transverse dimension.
All cases will have initial records presented, then the group will diagnose and treatment plan together.
A group session will ensue, followed by the actual treatment with interactive discussion.
    •    Class III treatment mechanics
    •    Class II treatment mechanics
    •    En masse retraction treatment mechanics
    •    Molar protraction treatment mechanics
    •    Openbite treatment mechanics
    •    Deepbite treatment mechanics
    •    Superuption treatment mechanics
    •    Dumped lower molar treatment mechanics
    •    Vertical maxillary excess treatment mechanics
    •    Impacted canine treatment mechanics
    •    Transverse discrepancy mechanics
    •    Temporary replacement of missing maxillary lateral incisors
WHAT ELSE IS INCLUDED?
 Food & Beverages: Food & Beverages will be provided; continental breakfast, lunch, & snacks.
 Course Materials: A fully digital course Manual full of tips, tricks, and hacks to make your learning curve much flatter.
Accountability: Access to our Secret OrthoEd TAD Alumni Facebook group.
 Celebration Dinner: On Friday, we'll have our traditional Celebration Dinner at Dr. Cope's favorite restaurant.
 14 ADA CERP CE Lecture Credits
 FREE BONUSES: Did you really think we'd spoil the surprise?
EDUCATIONAL OBJECTIVES
Upon course completion, the participants should understand the biomechanical implications of miniscrew implant orientation and placement in advanced cases of the sagittal, vertical, and transverse dimensions; understand treatment planning for miniscrew implants in advanced cases of the sagittal, vertical, and transverse dimensions; be able to think critically about when and if miniscrew implants provide a justifiable benefit in advanced cases of the sagittal, vertical, and transverse dimensions.
*Limited to 18 seats. Only 10 Seats Left
HERE'S WHAT ORTHODONTISTS ARE SAYING

"Jason’s ability to blend science, clinical protocols, and artistic creativity are outstanding.
A well-organized and concise format that was a jam-packed 48 hours".

Dr. Robert Kinniburgh

“The small group format allowed a level of instruction and discussion that was invaluable. Questions and answers could be pursued that would have been impossible in a traditional lecture.”

Dr. Michael Richards

"Jason is an amazing clinician and teacher. He has the uncanny ability to meld the science and clinical application of orthodontics and present even the smallest details in such a way that the attendees can put it to work in their own practice come Monday morning."

Dr. Adam Schulhof

"Jason has always pushed the advancement of the science and art of orthodontics, while passionately staying true to its core. His teachings have fundamentally made me a better clinician over the years, and furthermore have had a significant impact on my diagnostic and clinical efficiencies."

Dr. Maz Moshiri
 TUITION
Only ONE TAD CASE (that you would've otherwise referred out) easily pays for the tuition of this course and more!
Early Bird Special Price
By Jun 10, 2019
$2,197


By August 10, 2019
$2,297


After August 10  2019
$2,497
JOIN OUR PRIORITY LIST
JOIN OUR PRIORITY LIST
And Get Notified of New Course Dates before Registration is Officially Announced! 
Our Priority List gets notified of new course dates before Registration is officially announced. Once registration opens, seats are available on a first come first served basis. Based on previous courses, registration usually fills with members of our Priority List alone. So, please add your name and email below to get advanced notice of new dates and make sure to reserve your seats quickly after the
announcement of new course dates.

ATTENTION
Due to limited space, this course is being offered by invitation only. You have 48 hours to register before registration opens to our wait list and then to the public. Based on previous course dates and verbal commitments, we anticipate this will sell out in less than 24 hours. Make sure to reserve your seat as soon as possible.


Privacy Policy  I  Terms Of Use
Under Dog Media, LP, | Copyright 2018 | All Rights Reserved.
The instructor reports a financial interest in the products or companies discussed in the course as of the date of this publication.
OrthoEd reports that no commercial support has been provide for this course.
CE Provider: OrthoEd is an ADA CERP Recognized Provider. This continuing education activity has been planned and implemented in accordance with the standards of the ADA Continuing Education Recognition Program (ADA CERP).

Refund and cancellation policy: These courses are extremely limited in attendance. Therefore, if the course is greater than 180 days in the future, the registration fee is fully refundable, less an administrative fee equal to 20% of the total Course tuition. If the course is between 180 to 121 days in the future, refunds are not possible. However, registration fees are transferable to an ONLINE-ONLY OrthoEd Course for up to 12 months from the original course date, if space is available, or towards an ONLINE credit at www.OrthoEd.com, less an administrative fee equal to 20% of the total Course tuition. If the course is less than 120 days in the future, refunds are not possible due to the inability to find another registrant within the limited time constraints.

ADA CERP is a service of the American Dental Association to assist dental professionals in identifying quality providers of continuing dental education. ADA CERP does not approve or endorse individual courses or instructors, nor does it imply acceptance of credit hours by boards of dentistry.