THE ULTIMATE
In-house 
ALIGNER 
& digital orthodontics course
HANDS-ON BOOTCAMP
A Comprehensive Mastery Course on 
Digital Case Set-up, 3D Printing, and 
Aligner Fabrication & Delivery
November 1-2, 2019
JASON B. COPE, DDS, PhD - DALLAS, TX
*Limited to 14 seats. Only 1 Seats Left.
THE ULTIMATE
In-house 
ALIGNER 
& digital orthodontics course
HANDS-ON BOOTCAMP
A Comprehensive Mastery Course on 
Digital Case Set-up, 3D Printing, and 
Aligner Fabrication & Delivery
November 1-2, 2019
JASON B. COPE, DDS, PhD - DALLAS, TX
*Limited to 14 seats. Only 12 Seats Left.
THE ULTIMATE
In-house 
ALIGNER 
& digital workflow course
HANDS-ON BOOTCAMP
A Comprehensive Mastery Course on 
Digital Case Set-up, 3D Printing, and 
Aligner Fabrication & Delivery
APRIL 12-13, 2019 - SOLD OUT 
September 20-12, 2019
November 1-2, 2019
JASON B. COPE, DDS, PhD - DALLAS, TX
SOLD OUT
NEW DATES COMING SOON...
Due to limited space, this course is being offered by invitation only. Those on our PRIORITY LIST get invited 48 hours before registration is officially announced. Once invitations are sent, seats are available on a first come, first served basis. Based on previous courses, we anticipate this will sell out in less than 24 hours. Make sure to reserve your seat as soon as possible.
NEW DATES COMING SOON...

LAST DAYS TO REGISTER FOR AAO SPECIAL PRICE

ATTENTION
Due to limited space, this course is being offered by invitation only to our priority list. You have 24 hours to register before registration opens to the public. Based on previous course dates and verbal commitments, we anticipate this will sell out in less than 24 hours. Make sure to reserve your seat as soon as possible.
IS THIS COURSE FOR ME?
If you are already using digital technology in your practice and want to offer in-house aligners for mild to moderate cases but have no time to figure it out by yourself or just feel too overwhelmed to get started, this course is for you!

WHY SHOULD I MAKE MY OWN ALIGNERS?
  • ELIMINATE OVERHEAD: Considerably reduce expenses by cutting your clear aligner lab bills.
  • STAY AHEAD OF THE GAME: In-House Lab Technology is evolving rapidly, jump in before everyone else.
  • START TREATMENT FAST: Start treatment in days (or the same day if you're a ninja), instead of waiting for weeks.
  • CONTROL EVERYTHING: Have full control of aligner cases and get the exact results you envision on your own terms.
  • STAND OUT FROM COMPETITION: Create buzz and differentiate yourself by offering your very own branded aligners.
  • FLEXIBILITY: Replace or add aligners quickly and on-demand.
  • HAPPIER PATIENTS: Sit back, relax and let those raving patients do your marketing for you.
WHAT WILL I LEARN?
CASE SET UP
We'll dive deep into case setup and all its intricacies. We'll spend a substantial amount of time with you actually setting up your own case(s) so that by the time you leave, you can do it on your own.
3D PRINTING
There are many aspects of printing that require special attention in order to achieve optimal results. We'll cover everything 3D printing from A to Z.
CLEAR ALIGNERS
You'll learn dos and don'ts for in-house aligner setup and fabrication as well as how to deliver professionally branded aligners to your patients.
THE CAMPFIRE
One of the biggest hits is the group "campfire" where we share pearls and insights, troubleshoot, and brainstorm about how to best implement these concepts with specific scripts for our individual practices.
SOLD OUT
SOLD OUT
new dateS coming soon...
new dateS coming soon...
WHY WE'RE LEADING THE WAY
1. We Stand Alone
There is simply no other course out there that offers this level of hands-on experience and provides attendees the opportunity
to perform the entire process from software setup to 3D printing, packaging, and delivery.
2. We're Personal
We are limited to 12 attendees only and the course will take place in Dr. Cope's private practice, which allows for a level of instruction and participation that is unparalleled.
3. We're Objective
We’ll compare different hardware and software applications in a unbiased manner so you can decide what's best for your practice.
PREREQUISITES
PREREQUISITES
 You must have a comprehensive understanding of orthodontic biomechanics with at least 2 years of full-time orthodontic practice and advanced training.
 You must have an advanced understanding of aligner attachment design and placement during the treatment of full aligner cases. We'll dive deep into some subjects that will require you to be on your game.
 You'll be required to bring your own Windows computer meeting the minimum specifications for the Windows software used. Don't worry,  specific details of the software installation will be sent to you in advance of the course. We won't have time to offer any IT technical support or software installation troubleshooting, so you'll need to have your computer setup and ready to go.
Hurry! Only 1 Seats Left. 
PREREQUISITES
PREREQUISITES
 You must have a comprehensive understanding of orthodontic biomechanics with at least 2 years of full-time orthodontic practice and advanced training.
 You must have an advanced understanding of aligner attachment design and placement during the treatment of full aligner cases. We'll dive deep into some subjects that will require you to be on your game.
 You'll be required to bring your own Windows computer meeting the minimum specifications for the Windows software used. Don't worry,  specific details of the software installation will be sent to you in advance of the course. We won't have time to offer any IT technical support or software installation troubleshooting, so you'll need to have your computer setup and ready to go.
SOLD OUT
new dateS coming soon...
Hurry! Only 1 Spots Left!
WHO IS JASON B. COPE?
From TADs to TECH
Internationally acclaimed for his pioneering research and clinical techniques on TADs, Dr. Jason B. Cope is also widely known for being a perfectionist, not only for his orthodontic cases, but for everything he does. Although his name is synonymous with TADs, he was also one of the first orthodontists to implement digital technology into his practice and to deliver a turnkey solution to in-house aligners and indirect bonding. He's also a key leader in helping develop digital products and software available in orthodontics today.

Dr. Cope has spent the last two and half years perfecting the digital workflow of intra-oral scanning, digital case setup, 3D printing, and fabrication/delivery of in-house aligners and indirect bonding trays. Dr. Cope wasn't overly interested in clear aligner treatment until he felt that he could truly control every aspect of treatment and his final results. With an in-house digital workflow, that time is now.

His digital learning curve came with lots of expense and trial and error, and he wants to keep you from hitting the wall by attempting to learn the process from scratch. He uses his experience to help you to quickly incorporate digital orthodontics in your office while avoiding the mistakes he made.

During this course, Dr. Cope will show you what he considers the best in technology available and the most user-friendly software. He'll also show you how to streamline your workflow in the most seamless manner possible so you can achieve consistent results without the frustration of the usual learning curve.
Dr. Cope received his dental training at Baylor College of Dentistry - DDS (‘95), orthodontic certificate (‘97), and PhD (’99) in bone biology. He is currently on faculty in the Orthodontic Departments at Texas A&M College of Dentistry, St. Louis University,  and Kyung Hee University School of Dentistry. He has published 32 journal articles, 37 book chapters, co-edited a textbook on distraction osteogenesis, and self-published a 500 page textbook OrthoTADs: The Clinical Guide and Atlas. He is an ad hoc reviewer for every major American peer-reviewed orthodontic journal. He has given over 300 lectures internationally and nationally. He is Board Certified, a full member of the SW component of the Angle Society, and a fellow in the American College of Dentists.

COURSE OUTLINE
You'll implement everything you learn immediately through our hands-on, step-by-step processes to help you integrate the digital workflow and start making in-house aligners in your practice right away.
Overview of the software and hardware necessary to successfully implement your own digital workflow, including a discussion of the major and minor players in each category.

Each participant will perform or experience all aspects of the digital workflow from scanning to delivering aligners to patients.

All participants will use 3 different software applications to setup their own cases for retainers and aligners and create print-ready files.

All phases of aligner fabrication will be demonstrated - Etch templates, attachment templates, template loading, and packaging.

We'll troubleshoot and discuss as we go through each step. You'll learn invaluable tips and hacks that we've learned from day-to-day experience.
During the course, attendees will: 
- Use STL files to setup their cases in each of several ways. A) Using a browser-based software to submit, manage, and track their lab prescription to their in-house lab; manage their digital workflow; trim, base, and label STL files for 3D printing. B) Using a Windows-based software programs for in-house aligner setup with attachment design, basing, labeling the files, and outputting print-ready files. 

- Several of these cases will then be sent to the 3D printer for model printing and subsequent clear retainer or aligner fabrication. 

- Finally, we'll package and deliver aligners/retainers clinically. 
WHAT ELSE IS INCLUDED?
 Food & Beverages: Food & Beverages will be provided; continental breakfast, lunch, & snacks.
 Course Materials: A fully digital course Manual full of tips, tricks, and hacks to make your learning curve flatter
Accountability: Access to our Secret OrthoEd Facebook group
 Celebration Dinner: On Friday, we'll have our traditional Celebration Dinner at Dr. Cope's favorite restaurant.
 14 ADA CERP CE Credits: 7 Lecture + 7
Participation.
 FREE BONUSES: Did you really think we'd spoil the surprises?
EDUCATIONAL OBJECTIVES
Upon course completion, the participants should understand the basic benefits and fundamentals of digital orthodontics; understand the workflow of sending STL files to the various software applications for case setup; perform a digital case setup in tooth movement software; appreciate how to create print-ready files; understand how to implement 3D printing in an orthodontic office setting;troubleshoot potential 3D printing problems; perform clinical delivery of clear retainers and aligners.
SOLD OUT
new dateS coming soon...
EDUCATIONAL OBJECTIVES
Upon course completion, the participants should understand the basic benefits and fundamentals of digital orthodontics; understand the workflow of sending STL files to the various software applications for case setup; perform a digital case setup in tooth movement software; appreciate how to create print-ready files; understand how to implement 3D printing in an orthodontic office setting; troubleshoot potential 3D printing problems; perform clinical delivery of clear retainers and aligners.
HERE'S WHAT OUR ALUMNI ARE SAYING

"Hands down one of the most practical courses I have taken in a long time! If you want to learn about 3D printing and in-house aligners, sign up for the next course. You will not regret it.”

Dr. Dennis Flanagan

"This course offers you the opportunity to learn how to set it up from the start and hit the road running, instead of stumbling. Worth every penny."

Dr. Thuy Do

"If you're new to printing and in house aligners this course will save you a ton of trial and error. Wish I had taken this course two years ago. I would have saved thousand of dollars and hours of my own personal time."

Dr. Ryan Wiesemann

"I was hesitant in moving away from companies and attempting to do aligners on my own, but after learning in this course the techniques, different softwares and what we can do with In-house aligners. I'm now confident in tackling small to medium size cases on my own instead of sending it out" 
Dr. Nimesh Patel

"The course was amazing, best course ever. 100% recommend it! The customer service and level of attention makes it feel like it's 1-on-1.” 
Dr. Gustavo Salas
 TUITION
Only ONE IN-HOUSE ALIGNER CASE easily pays for the tuition of this course and more!
Early Bird Price
By Jun 10, 2019
$2,397


By Aug 10, 2019
$2,497


After Aug 10,  2019
$2,597
SOLD OUT
new date coming soon...
new date coming soon...

LAST DAYS TO REGISTER FOR AAO SPECIAL PRICE

ATTENTION
Due to limited space, this course is being offered by invitation only to our priority list. You have 24 hours to register before registration opens to the public. Based on previous course dates and verbal commitments, we anticipate this will sell out in less than 24 hours. Make sure to reserve your seat as soon as possible.
COURSE SPONSORS
The instructor reports no financial interest in the products or companies discussed in the course as of the date of this publication.
Privacy Policy  I  Terms Of Use
Under Dog Media, LP, | Copyright 2018 | All Rights Reserved.
CE Provider: OrthoEd is an ADA CERP Recognized Provider. This continuing education activity has been planned and implemented in accordance with the standards of the ADA Continuing Education Recognition Program (ADA CERP).

Refund and cancellation policy: These courses are extremely limited in attendance. Therefore, if the course is greater than 180 days in the future, the registration fee is fully refundable, less an administrative fee equal to 20% of the total Course tuition.  If the course is between 180 to 121 days in the future, refunds are not possible. However, registration fees are transferable to an ONLINE-ONLY OrthoEd Course for up to 12 months from the original course date, if space is available, or towards an ONLINE credit at www.OrthoEd.com, less an administrative fee equal to 20% of the total Course tuition. If the course is less than 120 days in the future, refunds are not possible due to the inability to find another registrant within the limited time constraints.


ATTENTION
Due to limited space, this course is being offered by invitation only. You have 48 hours to register before registration opens to our wait list and then to the public. Based on previous course dates and verbal commitments, we anticipate this will sell out in less than 24 hours. Make sure to reserve your seat as soon as possible.